Spuhr SCT-4001 Sako TRG & Tikka T3 Hunting Mount - Ø34 H30MM 0MIL - 1 Spuhr Interface
Spuhr Hunting Mount to fit Sako TRG & Tikka T3
The Spuhr Hunting Tikka T3x is aesthetically beautiful and designed to be the perfect match with your traditional hunting rifle these scope mounts from Spuhr still offer the same capabilities the ISMS have yet in a sleeker design. Unlike the ISMS the hunting series are available in three ring cap versions – the classic version (Aesthetic) that has no interfaces, the standard (hunting) which includes a single Spuhr interface on one ring and final being the true interface version that includes Spuhr interfaces on both rings.
The Spuhr Hunting Tikka T3x is a direct to dovetail system that is a one-piece system will require the shooter to remove the existing mounting solution on their rifle and replace with the Hunting Series.
Designed to fit the Tikka T3X yet will also fit on the SAKO TRG 22/42.
Note: For rifles with TRG/Tikka T3 dovetail - NOT for Picatinny rail or SAKO TRG-S., Heights are measured to the center of the ring
Specifications
0 MIL/0 MOA
Height: 30 mm/1.18”
Clearance: 2.75 mm/.108" (from the bottom of the tube to the bridge of the mount body)
Length: 118 mm/4.65”
Weight: 153 g/5.4 oz
Note: For rifles with TRG/Tikka T3 dovetail - NOT for Picatinny rail or SAKO TRG-S.
10-degree wedge included
Features
The SCT-4001 is designed for the Tikka T3X, but will also fit on the SAKO TRG 22/42, and features one classic ring and one interface ring, which can be rotated as to position the interface/accessory in either the 12-o'clock or 3-/9-o'clock position.